Aprimatic Automation Limited
Aprimatic Automation Limited
24 Volt
Skipper Articulated
Low voltage electro-mechanical operator with articulated arm for swing gates with leaf width from 2,3m up to 3m, for residential use, it's the ideal solution for gates with large pillar.
Supplied of mechanical limit switch to adjust the stroke and prevent the positioning in negative angle.
Emergency release positioned on the side of the operator. It can be connected by cable to allow the release from the outside.
Built-in control unit with self-learning programming and possibility of adjusting the parameters by means of a simple and intuitive menu.
Emergency power supply, in the event of power failure, guaranteed by two optional emergency batteries.
Complies with the current safety standards as regard to obstacle detection and inversion of movement in accordance with EN 12453 and EN 12445.
Raider One
Low voltage electro mechanical operator for swing gates with leaf width from 1,8m up to 3m max.
Condominium use with max leaf weight up to 800kg.
Motor with intelligent encoder to control the limit switch fitted as an optional on systems without floor stops.
Equipped by a rear articulated joint allows the adjustment of gate anomalies and a front mounting uniball feature.
Complies with the current safety standards as regard to obstacle detection and inversion of movement in accordance with EN 12453 and EN 12445.
New 24 Volt
Raider
Low voltage electromechanical operator for swing gates with leaf width from 1,8m up to 3m max.
Residential use with max leaf weight up to 250kg.
Stroke until 400mm.
Equipped by a adjustable rear bracket with pre-drill holes for various gate dimensions.
Is recommended the use of an electric lock for leaf longer than 1.8metres.
Emergency power supply, in the event of power failure, guaranteed by two optional emergency batteries.
Flexi
The new FLEXI operator with articulated arm features a modern design and compact size.
The mechanical reduction and control equipment technological features are top-notch quality. This results in a silent and smooth operation with opening and closing slow-down which safeguards mechanical components from sudden wear and tear while offering additional quietness when reaching the mechanical limit stops during closing.
The transmission arm is 85cm long and it provides strength and leaf locking at closing time, for lengths up to 3m.
The possibility of installing two mechanical limit stops on board, in addition to facilitating the installation, avoids the need of installing limit stops "on the ground", which can limit the usable area crossed by vehicles.
Easy and quick installation. The operator and arm fixing plates can either be installed with anchors and bolts, or welded. The operator’s compact size allows a non-invasive installation also on small size pillars.
Emergency power supply, in the event of power failure, guaranteed by two optional emergency batteries.